3Com 3031 Command Reference Manual page 269

View
Any view
Parameter
interface type number: ISDN interface type and number.
Description
Using the display isdn spid command, you can view the related information of
SPID on the BRI interface running the NI protocol.
You may execute this command to view the SPID type, SPID value and some other
information when ISDN is running. Executing this command without specifying an
interface, you may view the related information of SPI on all the SPID-supported
BRI interfaces. Alternatively, you may view the information only on one interface
by specifying its type and number.
Example
Display the related information of SPID on the NI-supported interface bri 0/0/0.
[3Com] display isdn spid interface bri 0/0/0
Interface bri 0/0/0:
SPID Type : AUTO
SPID B1 :
SPID Num: 124345
Neg State : SPID_ASSIGNED
Init State: INIT_NULL
SPID B2 :
SPID Num: 45645754
Neg State : SPID_ASSIGNED
Init State: INIT_NULL
SPID timer : 30 seconds
SPID resend: 2
Table 9 Description of the SPID parameters
Item Description
SPID Type SPID Type, which can be NIT, STATIC (having only the L3 initialization
process), or AUTO (including both the negotiation and the L3 initialization)
SPID B1 SPID value of the BRI interface B1 channel. It can be a static configuration
or the result of a dynamic negotiation, all depending on the specified SPID
Type.
SPID Num SPID value of the BRI interface.It can be a static configuration or the result
of a dynamic negotiation, all depending on the specified SPID Type.
Neg State Negotiation state of the SPID, which can be SPID_UNASSIGNED,
ASSIGN_AWAITING_SPID, SPID_ASSIGNED,
ASSIGN_AWAITING_CALL_CLEAR.
Init State Initialization state of the SPID, which can be INIT_NULL, INIT_IND,
INIT_PROCEEDING, INIT_END, INIT_AWAITING_CALL_CLEAR.
SPID B2 SPID value of the BRI interface B2 channel. It can be a static configuration
or the result of a dynamic negotiation, all depending on the specified SPID
Type.
SPID timer Duration of the timer TSPID
SPID resend SPID message retransmission times
ISDN Configuration Commands 269