3Com 3031 Command Reference Manual page 783

BGP/MPLS VPN Configuration Commands 783
routing-table: Displays BGP routes.
Description
Using the display bgp vpnv4 command, you can display VPNv4 information in BGP
database.
Example
Display the information about all BGP VPNV4 peers.
[3Com] display bgp vpnv4 all
BGP local router ID is 1.1.248.23
Status codes: s suppressed, d damped, h history, * valid, > best, i
internal
Origin codes: i – IGP, e – EGP, ? - incomplete
Network Next Hop Label Metric LocPrf
Path
Route Distinguisher:100:9 (default for vpn-instance
vpn-instance_1)
*> 192.5.1.0 0.0.0.0 16/0
display ip routing-table Syntax
vpn-instance
display ip routing-table vpn-instance vpn-instance-name [ ip-address ] [ verbose ]
View
Any view
Parameter
vpn-instance-name: Name assigned to vpn-instance.
ip-address: Displays information of the specified address.
verbose: Displays the detailed information.
Description
Using the display ip routing-table vpn-instance command, you can view the
specified information in the IP routing table of vpn-instance.
Example
Display the IP routing table associated with the vpn-instance.
[3Com] display ip routing-table vpn-instance vpn-instance1
Routing Table: vpn-instance1 RD: 1233:11
Destination/Mask ProtoPreMetric Nexthop Interface
192.1.1.0/24 Direct0 0192.1.1.1 GigabitEthernet1/0/0
192.1.1.1/32 Direct0 0127.0.0.1 InLoopBack0
192.1.1.255/32 Direct0 0127.0.0.1 InLoopBack0
display ip vpn-instance Syntax
display ip vpn-instance [ vpn-instance-name | verbose ]
View
Any view