3Com 3031 Command Reference Manual page 15

: Content of greeting information.
text
Description
Using the header command, you can set the greeting information to be displayed.
Using the undo header command, you can remove the preset greeting
information.
When a user is logging on to a router via a terminal line, the router prompts
related information through setting title attribute. After activating the terminal
connection, the router sends the login title to the terminal. If the user log on to
the router successfully, the shell greeting information will be displayed.
text takes the first English character as the start and end characters. After the end
character is input, the system will quit the interactive process automatically.
If you do not want to start the interactive process, make sure that the first and last
characters of the text are the same English character and press <Enter> directly.
Example
Configure a session creation title.
[3Com] header shell %
Enter TEXT message. End with the character '%'.
SHELL : Hello! Welcome use 3Com R1760.%
# Test the configuration.
[3Com] quit
<3Com> quit
Press RETURN to get started
SHELL : Hello! Welcome use 3Com R1760.
<3Com>
hotkey
Syntax
hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U ] command_text
undo hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U ]
View
System view
Parameter
: Specify a command for the hotkey <CTRL+G>.
CTRL_G
: Specify a command for the hotkey <CTRL+L>.
CTRL_L
: Specify a command for the hotkey <CTRL+O>.
CTRL_O
: Specify a command for the hotkey <CTRL+T>.
CTRL_T
: Specify a command for the hotkey <CTRL+U>.
CTRL_U
command_text: The command line correlated with the hotkey.
Basic Configuration Commands 15