3Com 3031 Command Reference Manual page 481

debugging ipx rip Syntax
debugging ipx rip { packet [ verbose ] | event }
undo debugging ipx rip { packet [ verbose ] | event }
View
User view
Parameter
Description
Using the debugging ipx rip command, you can enable RIP debugging switch to
view information on RIP packet received and transmitted, routing changes and
timer expiry. Using the undo debugging ipx rip command, you can disable RIP
debugging switch.
By default, IPX RIP debugging switch is disabled.
Example
Enable IPX RIP packet debugging switch.
<3Com> debugging ipx rip packet
Send RIP Response to Ethernet0/0, length 96
src:a.00e0-fc01-5517(453), dst:a.ffff-ffff-ffff(453)
Number of Entries in Pkt: 8
Enable IPX RIP packet verbose debugging switch.
<3Com> debugging ipx rip packet verbose
Send RIP Response to Ethernet0/0, length 96
src:a.00e0-fc01-5517(453), dst:a.ffff-ffff-ffff(453)
Number of Entries in Pkt: 8
Enable IPX RIP event debugging switch.
<3Com> debugging ipx rip event
*0.274181351-IPXRIP-8-IPXRIP_Event:
The number 1 equal route nexthop: 00e0-fc04-8859
*0.274181450-IPXRIP-8-IPXRIP_Event:
The network 8 totally have 1 equal route
debugging ipx Syntax
rtpro-flash
debugging ipx rtpro-flash
packet: Debugging information of packet received and transmitted.
verbose: Displays detailed information about packet received and transmitted.
event: Event debugging information, such as Up/Down of an interface and
related timer events.
Network 0x1, hops 2, delay 2
Network 0x2, hops 2, delay 2
Network 0x3, hops 2, delay 2
Network 0x4, hops 2, delay 2
Network 0x5, hops 2, delay 2
Network 0x6, hops 2, delay 2
Network 0x8, hops 2, delay 8
Network 0xa, hops 1, delay 2
IPX Configuration Commands 481