3Com 3031 Command Reference Manual page 128

128 C 2: S M & M C
HAPTER YSTEM AINTENANCE ANAGEMENT OMMANDS
Example
Set the system maintenance information as call Operator at 010-82882488.
[3Com] snmp-agent sys-info contact call Operator at 010-82882488
snmp-agent target-host Syntax
snmp-agent target-host trap address udp-domain X.X.X.X [ udp-port port-number
] params securityname security-string [ v1 | v2c | v3 { authentication | privacy } ]
undo snmp-agent target-host X.X.X.X securityname security-string
View
System view
Parameter
trap: Specifies the host as the trap host.
address: Specifies the address of the destination host where the SNMP message
transmits.
udp-domain: Specifies that the transmission domain of the destination host is
based on UDP.
X.X.X.X: IP address of the host.
udp-port: Specifies the port.
port-number: Specifies the port number that receives the trap packet.
params: Specifies the information of the logging host that generates SNMP
messages.
securityname: Specifies the community name of SNMPV1, V2C or the username of
SNMPV3.
security-string: Community name of SNMPV1, V2C or the username of SNMPV3,
in the range of 1 to 32 bytes.
v1: SNMPV1.
v2c: SNMPv2c.
v3: SNMPV3.
authentication: Performs authentication with the packet without encryption.
privacy: Performs both authentication and encryption with the packet.