3Com 3031 Command Reference Manual page 488

488 C 5: N P
HAPTER ETWORK ROTOCOL
Dest_Ntwk_ID Proto
Interface
0x11 Direct
Serial0/0/0
0x22 RIP
Serial0/0/0
0x33 Direct
Ethernet0/0/0
0x100 Static
Serial0/0/0
The following table explains the contents in the above displayed information:
Description of display information of the display ipx routing-table command
Item
Dest_Ntwk_ID
Proto
Pre
Ticks
Hops
Nexthop
Interface
Display detailed IPX routing information, including active and inactive routes.
<3Com> display ipx routing-table verbose
Routing tables:
Destinations: 103
Destination Network ID: 0x11
Protocol: Direct
Ticks: 6
Nexthop: 0.0000-0000-0000
Interface: 11.0000-0165-6400(Serial0)
State: <Active>
Destination Network ID: 0x22
Protocol: RIP
Ticks: 7
Nexthop: 11.0000-0165-6401Time: 15
Interface: 11.0000-0165-6400(Serial0)
State: <Active>
Destination Network ID: 0x33
Protocol: Direct
Ticks: 1
Nexthop: 0.0000-0000-0000Time: 0
Interface: 33.0000-0165-6400(Ethernet0)
State: <Active>
Destination Network ID: 0x100
Protocol: Static
Ticks: 6
Nexthop: 0.0000-0000-0000Time: 0
Interface: 11.0000-0165-6400(Serial0)
State: <Active>
Table 10 Description of display information of the display ipx routing-table verbose
command
Item Description
Aging time value of the route. Without aging, the value of interface route and static
Time route is 0.
Pre Ticks Hops Nexthop
0 6 0 0.0000-0000-0000
100 7 1 11.0000-0165-6401
0 1 0 0.0000-0000-0000
60 6 1 0.0000-0000-0000
Description
Destination network ID of the route
Protocol type of the route
Preference of the route
Ticks value of the route
Hops value of the route
The next hop of the route
Outgoing interface of the route
Routes: 103
Preference: 0
Hops: 0
Time: 0
Preference: 100
Hops: 1
Preference: 0
Hops: 0
Preference: 60
Hops: 1