3Com 3031 Command Reference Manual page 293

Frame Relay Configuration Commands 293
display fr compress Syntax
display fr compress [ interface interface-type interface-number ]
View
Any view.
Parameter
interface-type: Interface type.
interface-number: Interface number, in 3-dimension form: slot number/card
number/interface number.
Description
Using the display fr compress command, you can view the statistics information of
the frame relay compression. If no interface is specified, the DLCI statistics
information of all the interfaces will be displayed.
For the related command, see fr compression frf9.
Example
View the frame relay compression statistics information of MFR interface 4/0/0.
<3Com> display fr compress interface mfr 4/0/0
MFR4/0/0 -DLCI:25
uncompressed bytes xmt/rcv 0/0 compressed bytes xmt/rcv 0/0
1 min avg ratio xmt/rcv 0.000/0.000 5 min avg ratio xmt/rcv
0.000/0.000
display fr dlci-switch Syntax
display fr dlci-switch [ interface interface-type interface-num ]
View
Any view
Parameter
interface-type: Type of the interface.
interface-number: Number of the interface, including slot-number/ card-number/
port-number.
The specified interface can only be main interface. Information of all interfaces will
be displayed without specifying interface.
Description
Using the display fr dlci-switch command, you can view the information of the
configured FR switching to check if the frame relay switching of a user is correctly
configured.