3Com 3031 Command Reference Manual page 580

580 C 6: R P
HAPTER OUTING
display ospf vlink
filter-policy export
ROTOCOL
Destination
10.110.0.0/16
0
30.110.0.0/16
0
Total Nets: 2
Intra Area: 2
Syntax
display ospf vlink
View
Any view
Parameter
None
Description
Using the display ospf vlink command, you can view the information about OSPF
virtual links.
Example
View OSPF virtual links information.
<3Com> display ospf vlink
Virtual-link Neighbor-id
Cost: 0 State: Down
Transit Area: 0.0.0.1
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ routing-protocol ]
undo filter-policy {acl-number | ip-prefix ip-prefix-name} export [ routing-protocol ]
View
OSPF view
Parameter
acl-number: Access control list number.
ip-prefix-name Name of the address prefix list.
routing-protocol: Protocol advertising the routing information, including direct,
isis, bgp, rip and static at present.
Description
Using the filter-policy export command, you can configure the rule of OSPF
filtering the advertised routing information. Using the undo filter-policy export
command, you can cancel the filtering rules that have been set.
By default, no filtering of the distributed routing information is performed.
Cost Type NextHop
1 Net 10.110.0.1
1 Stub 30.110.0.1
Inter Area: 0 ASE: 0
-> 1.1.1.1, State: Down
Type: Virtual
AdvRouter
10.110.0.1
3.3.3.3
NSSA: 0
Area