3Com 3031 Command Reference Manual page 345

Parameter
max-number: Maximum number of supported VCs. Value range of this parameter
depends on interface type, as shown in the following table:
Table 16 The maximum number of VCs allowed for each type of ATM interface
Interface type
ADSL
GSHDSL
ATMOC3
ATM25
ATME3
ATMT3
Description
Using the pvc max-number command, you can set the maximum number of ATM
interface virtual circuits (VC). Using the undo pvc max-number command, you can
restore the default value.
This command is used to set the maximum number of the total available VCs for
ATM main interfaces and sub-interfaces.
Although this command is valid on both ATM main interface and sub-interface, it can only be
used in ATM main interface view and there is not this command in ATM sub-interface view.
For the related command, see display atm interface.
Example
The two examples can both make ATM interface Atm1/0/0 support totally 2048
VCs.
Display how to set ATM interface Atm1/0/0 to totally support maximum 2048
VCs.
[3Com-Atm1/0/0] pvc max-number 2048
Display how to set ATM interface Atm1/0/0 to support the default maximum
number of VCs (2048).
[3Com-Atm1/0/0] undo pvc max-number
pvp limit
Syntax
pvp limit vpi peak-rate
undo pvp limit vpi
View
ATM master interface view
ATM Configuration Commands
max-number
<1-32>
<1-32>
<1-1024>
<1-256>
<1-1024>
<1-1024>
345