3Com 3031 Command Reference Manual page 500

500 C 5: N
HAPTER ETWORK
ipx sap
max-reserve-servers
ipx sap mtu
P
ROTOCOL
[3Com] undo ipx sap gns-load-balance
Configure all servers to respond GNS request in Round-robin method.
[3Com] ipx sap gns-load-balance
Syntax
ipx sap max-reserve-servers length
undo ipx sap max-reserve-servers
View
System view
Parameter
length: The length of the dynamic service information reserve queue, ranges
from1 to 2048. By default, the value is 2048.
Description
Using the ipx sap max-reserve-servers command, you can configure the length of
the service information reserve queue. Using the undo ipx sap max-reserve-servers
command, you can restore the default configuration.
If the newly configured service information queue length is less than the present
one, the items in SIT will not be deleted. If the service information item number for
the same service type exceeds the maximum value configured, the new service
information will not be added.
Example
Set the maximum length of service information reserve queue to 1024.
[3Com] ipx sap max-reserve-servers 1024
Syntax
ipx sap mtu bytes
undo ipx sap mtu
View
Interface view
Parameter
bytes: The maximum SAP packet size in byte, ranging from 480 to 1500. By
default, the value is 480.
Description
Using the ipx sap mtu command, you can configure the maximum size of SAP
updating packet. Using the undo ipx sap mtu command, you can restore the
default configuration.
By default, the maximum size of SAP updating packet is 480 bytes. The size of IPX
header and SAP header is 32 bytes, so a 480-byte SAP updating packet contains 7
service information items (64 bytes each).