3Com 3031 Command Reference Manual page 298

298 C 4: L L P
HAPTER INK AYER ROTOCOL
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
DLCI = 102, USAGE = LOCAL (0010), INTERFACE = Serial1/0/0.1
create time = 2000/04/01 23:56:14, status = active
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
The information listed above shows various information about the FR PVC.
The above information indicates that: The PVC (DLCI=100) is the one (UNUSED)
obtained through negotiating with the peer end via LMI. It is configured on
Serial1/0/0. Establishing time is 2000/04/01 23:55:39. PVC status is active. The
packets received of Forward Explicit Congestion Notifications (FECN) and
Backward Explicit Congestion Notifications (BECN) are both 0. Received/sent
frames are 0. Received/sent bytes are 0.
display fr statistics
Syntax
display fr statistics [ interface interface-type interface-num ]
View
Any view
Parameter
interface-type interface-num: Used to specify the interface to be viewed. Only the
main interface can be specified here. The information of all interfaces will be
displayed for the command without specifying an interface.
Description
Using the display fr statistics command, you can view the current Frame Relay
statistics about receiving and sending packets.
The output information of this command can help the user to perform FR traffic
statistics and fault diagnosis.
For the related command, see display interface.
Example
Display the Frame Relay statistics about receiving and sending packets.
<3Com> display fr statistics
Frame relay packet statistics for interface Serial1/0/0 (DTE)
in packets = 84, in bytes = 1333
out packets = 92, out bytes = 1217
discarded in packets = 13, discarded out packets = 0
Frame relay packet statistics for interface Serial1/1/0 (DCE)
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
discarded in packets = 0, discarded out packets = 0