3Com 3031 Command Reference Manual page 751

MBGP Multicast Extension Configuration Commands 751
Parameter
group-name: Name of the peer group.
peer-address: IP address of the peer.
ip-prefix prefixname: Specifies ip-prefix name, ranging from 1 to 19 characters.
import: Applies the filter policy to routes accepted by the specified peer (group).
export: Applies the filter policy to routes sent by the specified peer (group).
Description
Using the peer ip-prefix command, you can configure the route filter policy based
on the address prefix-list for the peer (group). Using the undo peer ip-prefix
command, you can remove the configuration.
By default, no route filter policy is configured for the peer (group).
Example
Configure the route filter policy based on the address prefix-list for the peer.
<3Com-bgp-af-mul] peer group1 ip-prefix list1 import
peer next-hop-local Syntax
peer { group-name | peer-address } next-hop-local
undo peer { group-name | peer-address } next-hop-local
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.
peer-address: IP address of the peer.
Description
Using the peer next-hop-local command, you can remove the processing of the
next hop in routes which BGP will advertise to the peer (group) and set the local
address as the next hop. Using the undo peer next-hop-local command, you can
remove the existing setting.
Example
Set the local address as the next hop when advertising routes to peer group
named test.
<3Com-bgp-af-mul] peer test next-hop-local
peer public-as-only Syntax
peer { group-name | peer-address } public-as-only
undo peer { group-name | peer-address } public-as-only