3Com 3031 Command Reference Manual page 752

752 C 7: M
HAPTER ULTICAST
peer reflect-client
C C C
OMMON ONFIGURATION OMMANDS
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.
peer-address: IP address of the peer.
Description
Using the peer public-as-only command, you can configure only to carry public AS
number rather than private AS number when BGP sends update packets. Using
the undo peer public-as-only command, you can configure to carry private AS
number when BGP sends update packets.
By default, the private AS number is carried when BGP sends update packets.
Generally, BGP sends update packets with the AS number (which can be either the
public AS number or private AS number). To enable some external routers to
ignore the private AS number when sending update packets, you can configure
not to carry the private AS number when BGP sends update packets.
Example
Configure not to carry private AS number when BGP sends update packets to peer
group named test.
<3Com-bgp-af-mul] peer test public-as-only
Syntax
peer { group-name | peer-address } reflect-client
undo peer { group-name | peer-address } reflect-client
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.
peer-address: IP address of the peer.
Description
Using the peer reflect-client command, you can configure a peer (group) as a
client of the route reflector. Using the undo peer reflect-client command, you can
remove the existing configuration.
By default, there is no route reflector in the autonomous system.
Example
Configure peer group named test to be client of the route reflector.
<3Com-bgp-af-mul] peer test reflect-client