3Com 3031 Command Reference Manual page 315

Frame Relay Configuration Commands 315
[3Com] fr switching
[3Com] fr switch pvc1 interface serial 0/0/0 dlci 100 interface
serial 1/0/0 dlci 200
[3Com-fr-switching-pvc1]
fr switching
Syntax
fr switching
undo fr switching
View
System view
Parameter
None
Description
Using the fr switching command, you can enable frame relay PVC switching. Using
the undo fr switching command, you can disable frame relay PVC switching.
By default, no FR switching is enabled.
The command is used to enable Frame Relay PVC switching.
Example
Enable PVC switching on FR interface.
[3Com] fr switching
interface mfr Syntax
interface mfr interface-number [ .subnumber]
undo interface mfr interface-number [ .subnumber ]
View
System view
Parameter
interface-number: Interface number of a multilink frame relay bundle, including
slot number/card number/interface number, in which interface number ranges
from 0 to 1023.
subnumber: Sub-interface number of a multilink frame relay bundle, ranging from
0 to 4095.