3Com 3031 Command Reference Manual page 373

x25 local-cug Syntax
x25 local-cug cug-number network-cug cug-number [ no-incoming ] [
no-outgoing ] [ preferential ]
undo x25 local-cug cug-number
View
Interface view
Parameter
local-cug cug-number: Number of local cug.
network-cug cug-number: Number of network cug.
no-incoming: Suppresses incoming access.
no-outgoing: Suppresses outgoing access.
preferential: Suppresses the CUGs configured with preferential.
Description
Using the x25 local-cug command, you can define CUG suppress rules. Using the
undo x25 local-cug command, you can delete the rules. CUG suppress rules have
two: suppressing all CUG facilities and suppressing the mapping CUG facility
configured with preferential.
By default, no suppress rule is defined.
For the related commands, see x25 call-facility and x25 cug-service.
Example
Define the rule on the serial interface Serial0/0/0: the incoming calls with 100
local CUGs or 200 network CUGs are denied.
[3Com-Serial0/0/0] x25 cug-service
[3Com-Serial0/0/0] x25 local-cug 100 network-cug 200 no-incoming
x25 map
Syntax
x25 map { ip | compressedtcp } protocol-address x121-address x.121-address [
option ]
undo x25 map { ip | compressedtcp } protocol-address
View
Interface view
Parameter
ip: Uses IP protocol.
compressedtcp: Uses TCP header compression.
protocol-address: Network protocol address of the peer host.
LAPB and X.25 Configuration Commands 373