3Com 3031 Command Reference Manual page 299

display interface mfr
display mfr
The above information displays Frame Relay statistics about receiving and sending
packets.
For instance, it is known from the above information that the Frame Relay
interface type of Serial1/0/0 is DTE. Received packets are 84. Received bytes are
1333. Sent packets are 92. Sent bytes are 1217. Discarded packets in received
ones are 13. Discarded packets in sent ones are 0.
Syntax
display interface mfr [interface-number .sub-number]
View
Any view
Parameter
interface-number: Interface number, in 3-dimension form (slot number/card
number/interface number).
Sub-number: sub-interface number.
Description
This command is used to display the information of FR interface, including the
statistical information.
Example
To view the configuration and status information of MFR interface 4/0/123
<3Com> display interface mfr 4/0/123
MFR4/0/123 current state : UP
Line protocol current state : UP
Description : 3Com, 3Com Series, MFR4/0/123 Interface
The Maximum Transmit Unit is 1500
Internet Address is 12.12.12.2/16
link-protocol is FRAME-RELAY IETF
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE
LMI status enquiry sent 435, LMI status received 435
LMI status timeout 0, LMI message discarded 0
FIFO queuing: (Outbound queue:Size/Length/Discards)
FIFO: 0/75/0
5 minutes input rate 0 bytes/sec, 0 packets/sec
5 minutes output rate 0 bytes/sec, 0 packets/sec
1058 packets input, 832389 bytes, 0 drops
619 packets output, 828190 bytes, 0 drops
Syntax
display mfr [ interface interface-type interface-number | verbose ]
View
Any view
Frame Relay Configuration Commands 299