3Com 3031 Command Reference Manual page 557

RIP Configuration Commands 557
rip output Syntax
rip output
undo rip output
View
Interface view
Parameter
None
Description
Using the rip output command, you can configure an interface to transmit RIP
packets to the external. Using the undo rip output command, you can cancel an
interface to transmit RIP packets to the external.
By default, RIP packets at all interfaces (except loopback interface) can be
transmitted.
This command is used in cooperation with the other two commands: rip input and
rip work. Functionally, rip work is equivalent to rip input & rip output. The latter
two control the receipt and the transmission of RIP packets respectively on an
interface. The former command equals the functional combination of the latter
two commands.
For the related command, see rip input and rip work.
Example
Disable the interface serial1/0/0 to transmit RIP packets.
[3Com] interface serial1/0/0
[3Com-serial1/0/0] undo rip output
rip split-horizon Syntax
rip split-horizon
undo rip split-horizon
View
Interface view
Parameter
None
Description
Using the rip split-horizon command, you can configure an interface to use split
horizon when transmitting RIP packets. Using the undo rip split-horizon
command, you can configure an interface not to use split horizon when
transmitting RIP packets.
By default, an interface is enabled to use split horizon when transmitting RIP
packets.