3Com 3031 Command Reference Manual page 836

836 C 8: MPLS B C C
HAPTER ASIC ONFIGURATION OMMANDS
Example
Select SE type in creating CRLSP tunnels.
[3Com-tunnel1] mpls te signal-protocol rsvp-te
[3Com-tunnel1] mpls te resv-style se
mpls te signal-protocol Syntax
rsvp-te
mpls te signal-protocol rsvp-te
View
Tunnel view
Parameter
None
Description
Using the mpls te signal-protocol rsvp-te command, you can set signaling protocol
in creating tunnels as RSVP.
Example
Select RSVP in creating RSVP tunnels.
[3Com-tunnel] mpls te signal protocol cpldp
mpls te timer Syntax
periodic-flooding
mpls te timer periodic-flooding seconds
undo mpls te timer periodic-flooding
View
MPLS view
Parameter
seconds: Flood period, in the range of 0~3600 seconds. By default, it is 180
seconds.
Description
Using the mpls te timer periodic-flooding command, you can define flooding
period. Using the undo mpls te timer periodic-flooding command, you can restore
the default value.
All interfaces send link state update messages by flooding period.
Example
Set flood period to 2000 seconds.
[3Com-mpls] mpls te timer periodic-flooding 2000
next hop Syntax
next hop ip-address [ strict | loose ]