3Com 3031 Command Reference Manual page 356

356 C 4: L L
HAPTER INK AYER
display x25 map
display x25 pad
P
ROTOCOL
Syntax
display x25 map
View
Any view
Parameter
None
Description
Using the display x25 map command, you can view the X.25 address mapping
table.
The X.25 address mapping can be configured in two methods: special
configuration (through the x25 map command) or implied configuration (through
the x25 pvc command). The display x25 map command can be used to show all
the address mappings.
For the related commands, see x25 map, x25 pvc, x25 switch pvc, x25 xot pvc,
and x25 fr pvc.
Example
Display the X.25 address map table.
<3Com> display x25 map
Interface:Serial3/0/0(protocol status is up):
ip address:202.38.162.2
map-type: SVC_MAP
Facility:
ACCEPT_REVERSE;
BROADCAST;
PACKET_SIZE: I 512
Syntax
display x25 pad [ pad-id ]
View
Any view
Parameter
pad-id: PAD ID, its value ranges from 0 to 255. If it is not specified, all PAD
connection information will be displayed.
Description
Using the display x25 pad command, you can view X.25 PAD connection
information.
X.121 address: 22
VC-number: 0
O 512 ;