3Com 3031 Command Reference Manual page 47

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

Information Processing Commands

undo terminal monitor

Using the terminal monitor command, you can enable terminals to display the

debugging /logging/trapping information sent by the info-center. Using the undo

terminal monitor command, you can disable terminals to display the

debugging/logging/trapping information.

By default, the display function of console users is enabled but the display function

of terminal users is disabled.

The command only affects the current terminal that inputs it. The undo terminal

monitor command is equivalent to the execution of undo terminal debugging,

undo terminal logging, and undo terminal trapping commands, that is, all the

debugging/logging/trapping information will not be displayed at the current

terminal. In the event that terminal monitor has been enabled, the terminal

debugging/undo terminal debugging, terminal logging/undo terminal logging,

and terminal trapping/undo terminal trapping commands can be used to

enable/disable the debugging/logging/trapping information.

Disable terminal monitor.

<3Com> undo terminal monitor

terminal trapping

terminal trapping

undo terminal trapping

Using the terminal trapping command, you can enable the function of trap

information display at terminals. Using the undo terminal trapping command, you

can disable the function of trap information display at terminals.

By default, the system configuration is to enable the display function.