3Com 3031 Command Reference Manual page 214

214 C 3: I M C
HAPTER NTERFACE ANAGEMENT OMMANDS
Example
Deactivate the G.SHDSL interface.
[3com-Atm3/0/0] undo activate
shdsl annex Syntax
shdsl annex { a | b }
undo shdsl annex
View
ATM interface view
Parameter
a: Annex a
b: Annex b
Description
Using the shdsl annex command, you can configure annex standard at an SHDSL
interface. You cannot activate a link with different standard types at both ends.
Using the undo shdsl annex command, you can restore the default standard.
By default, annex b is selected.
Example
Restore the default standard type at the SHDSL interface.
[5680-Atm1/0/0]undo shdsl annex
shdsl rate Syntax
shdsl rate { auto | rate }
undo rate
View
ATM interface view
Parameter
auto: Auto-negotiation mode
rate: Specify maximum rate, in the range of 64~2312.