3Com 3031 Command Reference Manual page 521

llc2 timer ack-delay
llc2 timer busy
Description
Using the llc2 timer ack command, you can configure the LLC2 local response
time. Using the undo llc2 timer ack command, you can restore the default value of
the LLC2 local response time.
By default, the LLC2 local response time is 200ms.
The LLC2 local response time refers to the maximum waiting time for the response
from the peer end after an LLC2 data packet is sent.
Example
Configure the LLC2 local response time as 10ms.
[3Com-Ethernet1/0/0] llc2 timer ack 10
Syntax
llc2 timer ack-delay mseconds
undo llc2 timer ack-delay
View
Ethernet Interface view
Parameter
mseconds: Local acknowledgement delay time on receiving the information
frames, ranging from 1 to 60000ms.
Description
Using the llc2 timer ack-delay command, you can configure the local
acknowledgement delay time when the LLC2 receives information frames. Using
the undo llc2 timer ack-delay command, you can restore the default value of the
local acknowledgement delay time when the LLC2 receives information frame.
By default, the LLC2 local acknowledgement delay time is 100ms.
The LLC2 local acknowledgement delay time refers to the maximum waiting time
for delayed acknowledgement on receiving an LLC2 data packet.
Example
Configure the local acknowledgement delay time for received information frames
as 200 milliseconds.
[3Com-Ethernet1/0/0] llc2 timer ack-delay 200
Syntax
llc2 timer busy mseconds
undo llc2 timer busy
View
Ethernet Interface view
Parameter
mseconds: The LLC2 BUSY time, ranging from 1 to 60000ms.
DLSw Configuration Commands 521