3Com 3031 Command Reference Manual page 817

display mpls rsvp-te
established
Parameter
interface-type: Specifies interface type.
interface-number: Specified interface number.
Description
Using the display mpls rsvp-te command, you can view RSVP interface
information.
By default, information of all RSVP interfaces will be displayed.
Example
Display information of all RSVP interfaces.
[3Com-Ethernet0] display mpls rsvp-te
Display MPLS RSVP-TE config information
LSR ID: 1.1.1.1
RSVP-TE is enable
RSVP HELLO is disable
RSVP RCONF is disable
Default RSVP style is SE
HELLO interval is 3 second
HELLO lost times is 3
PATH and RESV message refresh interval is 30 second
PATH and RESV message resent times is 3
Blockade keep times is 4
# Display information of the interface Ethernet0/0/0.
[3Com] display mpls rsvp-te interface e0/0/0
IF Name
Ethernet0/0/0
Syntax
display mpls rsvp-te established [ interface interface-type interface-number ]
View
Any view
Parameter
interface-type: Specifies interface type.
interface-number: Specifies interface number.
Description
Using the display mpls rsvp-te established command, you can view LSP and
bandwidth information for RSVP.
By default, the filtering rule and bandwidth of all RSVP interfaces will be displayed.
Example
Display LSP and bandwidth of all RSVP interfaces.
[3Com] display mpls rsvp-te established
MPLS TE Configuration Commands
Status Total-BW Used-BW
DOWN 75000k 0k
817
Hello Nbr
NO 0