3Com 3031 Command Reference Manual page 742

742 C 7: M
HAPTER ULTICAST
display bgp multicast
group
display bgp multicast
network
display bgp multicast
routing-table
C C C
OMMON ONFIGURATION OMMANDS
Description
Using the debugging bgp mp-update command, you can enable the MBGP packet
debugging functions. Using the undo debugging bgp mp-update command, you
can disable the functions.
Example
Enable MBGP packet information debugging function.
<3Com> debugging bgp mp-update
Syntax
display bgp multicast group [ group-name ]
View
Any view
Parameter
group-name: Name of peer group. If no peer group is specified, the information
about all peer groups will be displayed.
Description
Using the display bgp multicast group command, you can view the information
about peer groups.
Example
Display the information about the peer group named my_peer.
<3Com> display bgp multicast group my_peer
Syntax
display bgp multicast network
View
Any view
Parameter
None
Description
Using the display bgp multicast network command, you can view the routing
information that MBGP advertises.
Example
Display the network segment routing information that MBGP advertises.
<3Com> display bgp multicast network
Syntax
display bgp multicast routing-table ip-address [ mask ]