3Com 3031 Command Reference Manual page 727

display msdp peer-status
display msdp sa-cache
Syntax
display msdp peer-status [ peer-address ]
View
Any view
Parameter
peer-address: Address of MSDP peer.
Description
Using the display msdp peer-status command, you can view the detailed
information of MSDP peer.
For the related command, see peer.
Example
Display the detailed information of the MSDP peer 10.110.11.11.
<3Com> display msdp peer-status 10.110.11.11
MSDP Peer 20.20.20.20, AS 100
Description:
Information about connection status:
State: Up
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Number of sent/received messages: 867/947
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Syntax
display msdp sa-cache [ group-address ] [ source-address ] [
autonomous-system-number ]
View
Any view
Parameter
group-address: Group address of (S, G) entry.
MSDP Configuration Commands 727