3Com 3031 Command Reference Manual page 787

BGP/MPLS VPN Configuration Commands 787
View
BGP unicast/multicast VPN-instance address family view, MBGP Interface
VPN-instance address family view
Parameter
process-id: OSPF procedure ID. By default, it is 1.
ospf: When only OSPF procedure ID is imported, ASE internal route is taken as
external route information.
ospf-ase: When only OSPF procedure ID is imported, OSPF-ASE route is taken as
external route information.
ospf-nssa: When only OSPF procedure ID is imported, OSPF-NSSA route is taken as
external route information.
med value: Route cost value
route-policyname: Route policy name
Description
Using the ip binding vpn-instance command, you can enable to import OSPF
route. Using the undo ip binding vpn-instance command, you can disable to
import OSPF route.
CAUTION: By default, the procedure ID IS 1.
Example
Enable to import an OSPF route with procedure ID 100.
[3Com] ip vpn-instance sphinx
[3Com-vpn-sphinx] route-distinuisher 168.168.55.1:85
[3Com-vpn-sphinx] quit
[3Com] bgp 352
[3Com-bgp] ip vpn-instance sphinx
[3Com-bgp-af-vpn-instance] import-route ospf 100
ip binding vpn-instance Syntax
ip binding vpn-instance vpn-instance-name
undo ip binding vpn-instance vpn-instance-name
View
Interface view
Parameter
vpn-instance-name: Name assigned to vpn-instance.
Description
Using the ip binding vpn-instance command, you can connect an interface or
sububterface with a vpn-instance. Using the undo ip binding vpn-instance
command, you can remove the connection.