3Com 3031 Command Reference Manual page 539

Parameter
protocol: Has multiple selectable values:
direct: Displays direct connection route information
static: Displays static route information.
bgp: Displays BGP route information.
isis: Displays IS-IS route information.
ospf: Displays OSPF route information.
ospf-ase: Displays OSPF ASE route information.
ospf-nssa: Displays OSPF NSSA route information.
rip: Displays RIP route information.
inactive: With the parameter, this command displays the inactive route
information. Without the parameter, this command displays the active and
inactive route information.
verbose: With the verbose parameter, this command displays the verbose
routing information. Without the parameter, this command displays the route
summary.
Description
Using the display ip routing-table protocol command, you can view the routing
information of specified protocol.
Example
Display all direct connection routes summary.
<3Com> display ip routing-table protocol direct
DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/MaskProto
20.1.1.1/32DIRECT 00127.0.0.1InLoopBack0
127.0.0.0/8DIRECT 00127.0.0.1InLoopBack0
127.0.0.1/32DIRECT
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/MaskProto
210.0.0.1/32DIRECT 0
Display the static routing table.
<3Com> display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask Proto
1.2.3.0/24
2/0/0
Display Commands of the Routing Table
Pre Cost NexthopInterface:
00127.0.0.1InLoopBack0
PreCostNexthopInterface
0127.0.0.1InLoopBack0
Pre Cost
STATIC 60 0
Nexthop Interface
1.2.4.5 Ethernet
539