3Com 3031 Command Reference Manual page 67

FTP Server Configuration Commands 67
ftp server enable
Syntax
ftp server enable
undo ftp server
View
System view
Parameter
None
Description
Using the ftp server enable command, you can enable the FTP server and allow the
login of FTP users. Using the undo ftp server command, you can disable the FTP
server and the login of FTP users.
By default, the FTP server is off.
Example
Disable the FTP server.
[3Com] undo ftp server
ftp timeout
Syntax
ftp timeout minute
undo ftp timeout
View
System view
Parameter
minute: Connection timeout in minutes, in the range of 1 to 35791. By default,
the connection timeout is 30 minutes.
Description
Using the ftp timeout command, you can set the connection timeout. Using the
undo ftp timeout command, you can restore the default connection timeout.
Once the user logs on the FTP server, he establishes a connection with the FTP
server. If an abnormal disconnection occurs or the user abnormally disrupts the
connection, FTP server is not notified and thus the connection is still on. To avoid
such a problem, the connection timeout should be set. If no command interaction
is conducted during this period, FTP will regard the connection failed and disrupt
the connection.