3Com 3031 Command Reference Manual page 431

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

Using the reset dhcp server conflict command, you can clear the statistics about

DHCP address collision.

In the case that no parameter has been specified when the command is

configured, the scope in which that the command takes effect will depend on the

view in which the command is executed.

For the related command, see display dhcp server conflict.

Clear all the address collision statistics.

<3Com> reset dhcp server conflict

reset dhcp server

reset dhcp server ip-in-use [ ip ip-address | pool [ pool-name ] | interface [

interface-name ] | all ]

Using the reset dhcp server ip-in-use command, you can clear the DHCP dynamic

address binding information.

In the case that no parameter has been specified when the command is

configured, the scope in which that the command takes effect will depend on the

view in which the command is executed.

ip-address: A specified IP address.

all: All the address pools.

If the command is executed in Ethernet interface view, it will take effect on the

address pool of the current interface.

If the command is executed in any other views, it will take effect on all the

address pools.

ip-address: Binding information of a specified IP address.

pool-name: Specifies a global address pool. All the global address pools will

apply if no address pool has been specified.

interface-name: Specifies an interface address pool. If no interface has been

specified, all the interface address pools will apply.

all: All the address pools.

If the command is executed in Ethernet interface view, it will take effect on the

address pool of the current interface.

DHCP Server Configuration Commands