3Com 3031 Command Reference Manual page 218

218 C 3: I
HAPTER NTERFACE
display dsl version
M C
ANAGEMENT OMMANDS
Actual RecvGain(dB):
Actual TxPower(dBm):
Actual Wire Type:
FrmOH Stat:
Rmt Encoder A :
Rmt Encoder B :
Rmt NSF Cusdata :
Rmt NSF CusID :
Rmt Country Code :
Rmt Provider Code:
Rmt Vendor Data:
Table 6 Displaying information of display dsl status
Field
Operating Mode
Wire Type
Phy Op State
Xcvr Op State
Actual LoopAttn(dB)
Actual RecvGain(dB)
Actual TxPower(dBm)
FrmOH Stat
Rmt NSF Cusdata
Rmt NSF CusID
Syntax
display dsl version interface atm interface-number
View
Any view
Parameter
interface-number: Interface number
Description
Using the display dsl version command, you can display DSL version and functions
available.
Example
Display G.SHDSL version.
[3com-Atm3/0/0] display dsl version interface atm 3/0/0
Dsl Line Type:
ATM SAR Device:
ATM SAR Revision:
Chipset Vendor:
11.4
14.5
2
0x0f
0x6e010000
0x31030000
0x0000
0x0000
0x00b5
0x4753504e
NPSG
0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
Description
CPE stands for customer premises equipment and CO for central
office.
The options include 2-line type and 4-line type. Currently only
2-line type is available.
Interface state and the options include activating, active,
startup, deactivated and test mode.
Transceiver state and the options include idle, data mode,
handshaking and training.
Actual loop attenuation
Actual receive gain
Actrual transmit gain
FirmWare Over Head state
User data
User ID
G.SHDSL
0x823614f1
0x02
GSPN