3Com 3031 Command Reference Manual page 548

548 C 6: R P
HAPTER OUTING
filter-policy export
filter-policy import
ROTOCOL
Description
Using the display rip vpn-instance command, you can view the related
configuration of VPN instance of RIP.
Example
None
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ routing-protocol ]
undo filter-policy { acl-number | ip-prefix ip-prefix-name } export [ routing-protocol
]
View
RIP view
Parameter
acl-number: Access control list number used for filtering the destination
addresses of the routing information.
ip-prefix-name: Name of address prefix list used for filtering the destination
addresses of the routing information.
routing-protocol: Routing protocol whose routing information is to be filtered,
including direct, isis, bgp, ospf, ospf-ase, ospf-nssa, and static at present.
Description
Using the filter-policy export command, you can configure to filter the advertised
routing information by RIP. Using the undo filter-policy export command, you can
configure not to filter the advertised routing information.
By default, RIP does not filter the advertised routing information.
For the related commands, see acl, filter-policy import, and ip ip-prefix.
Example
Filter the advertised route information according to acl 3.
[3Com-rip] filter-policy 3 export
Syntax
filter-policy gateway ip-prefix-name import
undo filter-policy gateway ip-prefix-name import
filter-policy { acl-number | ip-prefix ip-prefix-name [ gateway ip-prefix-name ] }
import
undo filter-policy { acl-number | ip-prefix ip-prefix-name [ gateway ip-prefix-name ]
} import
View
RIP view