3Com 3031 Command Reference Manual page 594

594 C 6: R P
HAPTER OUTING
reset ospf
router id
ROTOCOL
Example
Specify the preference of an external imported route of the AS as 160.
[3Com-ospf-1] preference ase 160
Syntax
reset ospf [ statistics ] { all | process-id }
View
User view
Parameter
statistics: Resets statistics of the OSPF process.
process-id: OSPF process number. If no OSPF process number is specified, all
the OSPF processes should be reset.
all: Resets all the OSPF processes.
Description
Using the reset ospf all command, you can reset all the OSPF processes. Using the
parameter of statistics to reset statistics about OSPF.
The reset ospf process-id command can be used to reset the specified process and
clear statistics data. Using the parameter of statistics to reset statistics about OSPF.
Using the reset ospf command to reset the OSPF process, the following results are
expected:
Clear invalid LSA immediately without waiting for LSA timeout.
If the Router ID changes, a new Router ID will take effect by executing the
command.
Re-elect DR and BDR conveniently.
OSPF configuration will not be lost if the system is restarted.
Delete the original OSPF routes.
After OSPF process is restarted, new routes and LSA will be generated
correspondingly and LSA will be advertised.
The system will require the user to confirm whether to re-enable the OSPF
protocol after execution of the command.
Example
Reset all the OSPF processes
<3Com> reset ospf all
Reset the OSPF process 200
<3Com> reset ospf 200
Syntax
router id router-id
undo router id