3Com 3031 Command Reference Manual page 534

534 C 6: R
HAPTER OUTING
display ip routing-table
acl
P
ROTOCOL
4.4.4.1/32
127.0.0.0/8
127.0.0.1/32
Syntax
display ip routing-table acl { acl-number | acl-name } [ verbose ]
View
Any view
Parameter
acl_number: Number of basic ACL, ranging from 1 to 99.
acl-name: Name of basic ACL.
verbose: With the parameter, this command displays the verbose information
of both the active and inactive routes that passed filtering rules. Without the
parameter, this command only displays the summary of the active routes that
passed filtering rules.
Description
Using the display ip routing-table acl command, you can view the route filtered
through specified basic access control list (ACL).
The command is used in tracking route policy to display the route that passed the
filtering rule according to the input basic ACL number or name.
The command is only applicable to view the route that passed basic ACL filtering
rules.
Example
View the summary of active routes that are filtered through basic ACL 1.
<3Com> display ip routing-table acl 1
Routes matched by access-list 1:
Summary count: 4
Destination/MaskProtoPreCost NexthopInterface
127.0.0.0/8Direct00127.0.0.1InLoopBack0
127.0.0.1/32Direct00127.0.0.1InLoopBack0
169.0.0.0/8Static60 02.1.1.1LoopBack1
169.0.0.0/15Static6002.1.1.1LoopBack1
Display the verbose information of the active and inactive routes
that are filtered through basic ACL1.
<3Com> display ip routing-table acl 1 verbose
Routes matched by access-list 1:
Generate Default: no
+ = Active Route, - = Last Active,
Summary count:5
**Destination: 127.0.0.0Mask: 255.0.0.0
Protocol: DirectPreference: 0
*NextHop: 127.0.0.1Interface: 127.0.0.1(InLoopBack0)
Vlinkindex: 0
State: <NoAdvise Int ActiveU Retain Multicast Unicast>
Age: 3:47Metric: 0/0
**Destination: 127.0.0.1Mask: 255. 255. 255. 255
Protocol: DirectPreference: 0
*NextHop: 127.0.0.1Interface: 127.0.0.1(InLoopBack0)
DIRECT 0 0
DIRECT 0 0
DIRECT 0 0
= Both* = Next hop in use
127.0.0.1 InLoopBack0
127.0.0. 1
127.0.0.1
InLoopBack0
InLoopBack0