3Com 3031 Command Reference Manual page 301

Add_link: sent packets = 112, rcv'd packets = 2,
Add_link_ack: sent packets = 2, rcv'd packets = 2,
Add_link_rej: sent packets = 0, rcv'd packets = 0,
Remove_link: sent packets = 0, rcv'd packets = 0,
Remove_link_ack: sent packets = 0, rcv'd packets = 0,
Hello: sent packets = 2180, rcv'd packets = 2174,
Hello_ack: sent packets = 2174, rcv'd packets = 2174,
outgoing pak dropped = 0, incoming pak dropped = 83
Cause code = ack timer expiry, Ack timer = 4, Hello timer =
10,
Max retry count = 2,
Current count = 0,
Peer LID =
Table 14 Output information description of display mfr command
Item
Bundle interface
Bundle state
Bundle class
fragment disabled
Bundle BID
Number of bundle links
Peer's bundle-id
Bundle links
PHY state
Link state
LID
Bundle Link statistics:
Add_link
Add_link_ack
Add_link_rej
Remove_link
Remove_link_ack
Hello
Hello_ack
outgoing pak dropped
incoming pak dropped
Frame Relay Configuration Commands
Description
Bundle
Running state of bundle interface
Class A indicates if there is one bundle link is in up state, the bundle is
flagged as up. Moreover, all bundle links should be flagged as down
before the bundle is down.
Disable fragmentation function
Bundle identifier
Number of bundle links
Bundle identifier of the peer
Physical interface information of each bundle link
Running state of physical interface
Running state of bundle link line protocol
Bundle link identifier
Packet statistics information of bundle link
Number of "Add_link" packets sent and received
The "Add_link" packet is used to notify the peer that the local node
has prepared for processing frames.
Number of "Add_link" acknowledgment packets sent and received
The "Add_link_ack" packet is used to notify the peer that an
"Add_link" packet has been received.
Number of "Add_link" reject packets sent and received
The "Add_link_rej" packet is used to notify the peer that an
"Add_link" packet has been rejected.
Number of "Remove_link" packets sent and received
The "Remove_link" packet is used to notify the peer that the local
node is removing a bundle link from the bundle.
Number of "Remove_link" acknowledgement packets sent and
received
The "Remove_link_ack" packet is used to notify the peer that a
"Remove_link" packet has been received.
Number of "Hello" packets sent and received.
The "Hello" packet is used to maintain link state.
Number of "Hello" acknowledgment packets sent and received.
The "Hello_ack" packet is used to notify the peer that a "Hello"
packet has been received.
Number of discarded packets that are sent
Number of discarded packets that are received
301