3Com 3031 Command Reference Manual page 750

750 C 7: M C C C
HAPTER ULTICAST OMMON ONFIGURATION OMMANDS
Example
Enable the multicast peer 1.1.11.1.
<3Com-bgp-af-mul] peer 1.1.11.1 enable
<3Com-bgp] peer test enable
peer filter-policy Syntax
peer { group-name | peer-address } filter-policy acl-number { import | export }
undo peer { group-name | peer-address } filter-policy acl-number { import | export }
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.
peer-address: IP address of the peer.
acl-number: IP ACL number, ranging from 1 to 199.
import: Specifies an import policy.
export: Specifies an export policy.
Description
Using the peer filter-policy command, you can set the filter policy list for a peer
(group). Using the undo peer filter-policy command, you can remove the existing
setting.
By default, the peer (group) has no ACL.
For the related command, see peer as-path-acl.
Example
Set the filter policy list for a peer.
<3Com-bgp] peer test as-number 100
<3Com-bgp] ipv4-family multicast
<3Com-bgp-af-mul] peer test enable
<3Com-bgp-af-mul] peer test filter-policy 3 import
peer ip-prefix
Syntax
peer { group-name | peer-address } ip-prefix prefixname { import | export }
undo peer { group-name | peer-address } ip-prefix prefixname { import | export }
View
IPv4 multicast sub-address family view