3Com 3031 Command Reference Manual page 828

828 C 8: MPLS B
HAPTER ASIC
mpls rsvp-te timer
refresh
mpls-te enable
C C
ONFIGURATION OMMANDS
Restore the default value.
[3Com] undo mpls rsvp-te timer hello
Syntax
mpls rsvp-te timer refresh seconds
undo mpls rsvp-te timer refresh
View
System view
Parameter
seconds: Time interval for refreshing Path/Resv messages, in the range of 1~65535
seconds. By default, it is 30 seconds.
Description
Using the mpls rsvp-te timer refresh command, you can define refreshing period
for Path and Resv messages of the node. Using the undo mpls rsvp-te timer refresh
command, you can restore the default values.
For the related command, see mpls rsvp-te keep-multiplier.
Example
Set refreshing period for Path and Resv messages as 60 seconds.
[3Com] mpls rsvp-te timer refresh 60
Restore the default refreshing period.
[3Com] undo mpls rsvp-te timer refresh
Syntax
mpls-te enable
undo mpls-te
View
Area view
Parameter
None
Description
Using the mpls-te enable command, you can enable TE function in OSPF area.
Using the undo mpls-te command, you can cancel TE function in OSPF area.
CAUTION:
By default, TE function is disabled in OSPF area.
TE function cannot be enabled until Opaque function is enabled for OSPF
procedure.