3Com 3031 Command Reference Manual page 495

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

ipx rip multiplier

ipx rip timer update

Configure the maximum size of RIP updating packets on the interface

Ethernet1/0/0 to 500 bytes.

[3Com-Ethernet1/0/0] ipx rip mtu 500

ipx rip multiplier multiplier

undo ipx rip multiplier

multiplier: It is used to calculate the aging period of RIP routing information

table items, ranging from 1 to 1000. By default, the value is 3. The actual aging

time is the value of multiplier multiplied by the RIP updating interval.

Using the ipx rip multiplier command, you can configure the aging period of RIP

routing information table items. Using the undo ipx rip multiplier command, you

can restore the default configuration.

By default, RIP aging period is 3 times of updating interval.

Routers may contain a timer for each item in their routing information table,

which keeps track of elapsed time since the route was received. Every time the

updating packet containing the routing information is received, the timer is reset

to zero. If RIP route is not updated in a period of time, the system will regard the

route is no longer valid and delete it from the routing table.

For the related command, see ipx rip timer update.

Configure RIP aging period of routing information table items is 5 times of

updating interval.

[3Com] ipx rip multiplier 5

ipx rip timer update seconds

undo ipx rip timer update

seconds: RIP updating interval in second, ranging from 10 to 60000.

IPX Configuration Commands