3Com 3031 Command Reference Manual page 117

display snmp-agent
community
display snmp-agent
group
SNMP local EngineID indicates the ID of the local SNMP engine.
Syntax
display snmp-agent community [ read | write ]
View
Any view
Parameter
read: Displays the community name information with the read-only authority.
write: Displays the community name information with the authority of read and
write.
Description
Using the display snmp-agent community command, you can display the currently
configured community name of SNMPv1 or SNMPv2.
Example
Display the currently configured community name.
<3Com> display snmp-agent community
Community name:8040zlz
Group name:8040zlz
Storage-type: nonVolatile
Community name:8040core
Group name:8040core
Storage-type: nonVolatile
Syntax
display snmp-agent group [ group-name ]
View
Any view
Parameter
group-name: Specifies the group name of the SNMP information to be displayed,
ranging 1 to 32 bytes.
Description
Using the display snmp-agent group command, you can display the group
information based on USM. Without parameters, the command displays the group
information corresponding to all the specified group names, including group
name, security mode, storage types on the router etc.
SNMP Configuration Commands 117