3Com 3031 Command Reference Manual page 385

.
.*
.+
Table 23 Input rules of X.121 address mode matching string
Characters
*
+
\
^
For the related commands, see display x25 switch-table svc.
Example
Add an X.25 switching route, whose destination address is 8888 and forwarding
address is the hunt group hg1, and substitute the destination address with 9999.
[3Com] x25 switch svc 111 sub-dest 9999 sub-source 8888 hunt-group
hg1
x25 switch svc xot
Syntax
x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] xot ip-address1 [ ip-address2 ] ... [ ip-address6 ] [ xot-option ]
undo x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] [ xot ip-address1 [ ip-address2 ] ... [ ip-address6 ] ]
View
System view
Parameter
x.121-address: Destination address of X.121. This parameter consists of mode
matching string, and its length ranges from 1 to 15 characters. For the specific
description of mode matching, see Table 10-4 and Table 10-5.
sub-dest destination-address: Substitution destination address.
sub-source source-address: Substitution source address.
ip-address1 - ip-address6: Destination IP address of XOT connection, up to 6
addresses can be configured.
xot-option: XOT channel parameter option. For the specific configuration, see XOT
channel parameter option.
LAPB and X.25 Configuration Commands
Matching arbitrary single character
Matching arbitrary zero or more characters.
Matching arbitrary one or more characters.
Input rules
Cannot be placed at the beginning of character string
Cannot be placed after the symbol ^
Cannot be placed before and after the symbols + and *.
Cannot be placed at the beginning of character string
Cannot be placed after the symbol ^
Cannot be placed before and after the symbols + and *.
Cannot be placed at the end of character string
Cannot be placed before the symbols + and *.
385
l.st
fo.*
fo.+