3Com 3031 Command Reference Manual page 472

472 C 5: N P
HAPTER ETWORK ROTOCOL
Main board
Total success packet number: 0
Total failure packet number: 0
The above information shows the forwarding success and failure times for all the
forwarding policy (i.e., the apply clause) of the local router policy routing.
To display the more detail statistics classified according to each apply clause, the
option verbose should be added.
<3Com> display ip policy statistic local verbose
local policy pr02 detail information:
Main board
apply output-interface: NULL0
Total success packet number: 0
Fail for interface not exists: 0
Fail for interface down: 0
apply ip-address next-hop: 5.5.5.5
Total success packet number: 0
Fail for error next-hop: 0
Fail for interface not exists: 0
Fail for interface down: 0
If the optional field verbose is added, the more detail statistics of each apply clause
in the policy routing will be displayed separately and the statistics of the
forwarding errors has been classified.
if-match acl
Syntax
if-match acl acl-number
undo if-match acl acl-number
View
Route-policy view
Parameter
acl-number: Address access control list number.
Description
Using the if-match acl command, you can set the match condition for IP address.
Using the undo if-match acl command, you can delete the IP address match
condition.
An acl-number can be basic standard access-list or advanced access-list.
For the related command, see if-match packet-length.
Example
Set packets that accord with the access list 10 to be matched.
[3Com] route-policy map1 permit node 10
[3Com-route-policy] if-match acl 10
if-match packet-length
Syntax
if-match packet-length min-len max-len