3Com 3031 Command Reference Manual page 11

clock timezone
command-privilege
Example
Set the current system time to 10:20:55 2003/04/05.
<3Com> clock datetime 10:20:55 2003/04/05
Syntax
clock timezone zone_name { add | minus } HH:MM:SS
undo clock timezone
View
User view
Parameter
zone_name: Timezone name, which is a string of 1 to 32 characters.
add: Adds the time on the basis of Universal Time Coordinated (UTC)
timezone.
minus: Reduces the time on the basis of UTC timezone.
HH:MM:SS: Time (hour/minute/second).
Description
Using the clock timezone command, you can set information of the local
timezone. Using the undo clock timezone command, you can restore the local
timezone to the default UTC timezone.
After the configuration takes effect, you can view it by executing the display
clock command. The time applied to the log and debug information has been
adjusted according to the involved timezone and summer time.
For related command, see clock summer-time.
Example
Set the local timezone name to Z5 and set Z5 to be five hours faster than UTC
time.
<3Com> clock timezone z5 add 05:00:00
Syntax
command-privilege level level view view command-key
undo command-privilege view view command-key
View
System view
Parameter
level level: Command priority ranging from 0 to 3.
view view: View. The command line provides the following views:
1 shell: View of current user level.
2 system: System view
3 Routing protocol view: Include ospf (OSPF view), rip (RIP view), bgp (BGP view),
isis (IS-IS view), etc.
Basic Configuration Commands 11