3Com 3031 Command Reference Manual page 153

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

reset counters interface

Note that executing the undo interface command also deletes the defined logical

interfaces (such as dialer, tunnel, and virtual-template interfaces) and

subinterfaces.

Enter the Ethernet interface view in system view.

[3com]interface ethernet 0/0/0

[3com-Ethernet0/0/0]

Switch from Ethernet0 view to the view of the subinterface Serial0/0/0.1.

-Ethernet0/0/0]interface serial0/0/0.1

-Serial0/0/0.1]

reset counters interface [ type number ]

type: Interface type which is used along with number for identifying an interface.

number: Interface number which is used along with type for identifying an

Using the reset counters interface command, you can clear the statistics of the

transmitted and received packets on an interface.

If no interface has been specified, the statistics about the transmitted and received

packets on all the interfaces are cleared.

To count the traffic size on an interface within a specific period, you must clear the

existing statistics about the transmitted and received packets on the interface

before taking a new count.

For a related command, see display interface.

Clear the statistics about the transmitted and received packets on Serial 0/0/0.

> reset counters interface serial 0/0/0

undo shutdown

Interface Management Commands