3Com 3031 Command Reference Manual page 17

ESC_<
ESC_>
language-mode
Syntax
language-mode { chinese | english }
View
User view
Parameter
None
Description
Using the language-mode command, you can switch between different language
modes of command line interface.
By default, the language mode is English.
The command line interface of the system also supports Chinese mode to fit into
domestic users in China.
Example
Switch from English mode to Chinese mode.
<3Com> language-mode chinese
Change language mode, confirm? [Y/N]y
% Switch to Chinese mode.
lock
Syntax
lock
View
User view
Parameter
None
Description
Using the lock command, you can lock the active user interface to prevent
unauthorized user from operating the interface.
A user interface includes CON port, AUX port and VTY, etc.
After inputting the lock command, the user is prompted to enter the screensaver's
password and confirm the password. If the two passwords are the same, the
interface will be successfully locked. To enter the system once again, you must
press <Enter> first, and enter the preset password following the prompt.
Example
Log in from the CON port and lock the active user interface.
Specify the beginning of clipboard.
Specify the end of clipboard.
Basic Configuration Commands 17