3Com 3031 Command Reference Manual page 224

224 C 3: I
HAPTER NTERFACE
display dsl status
M C
ANAGEMENT OMMANDS
DMT Bits Allocation Per Bin (Up/Down Bits:249/2148)
00: 0 0 0 0 0 0 7 8 a a a a 8 a b c c c b b b b b b 9 9 a a 9 8 8 0
20: 0 0 0 0 2 2 2 3 4 4 5 6 6 7 7 8 8 8 8 8 9 9 a a a a a a a 8 9 a
40: 0 a a a a b b b b b a b b b b b b b b b b b b b b b b b b b b b
60: b b b b b b b b b b b b b b b b b b b a 9 4 a b b b b b b b b b
80: b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b b
a0: b b b a b a b a b b a b b b b b a a b a a b b a a a a a a a a a
c0: a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
e0: a 9 9 a 9 9 9 9 9 9 8 9 9 9 9 9 9 9 9 9 8 8 8 8 8 7 7 7 7 6 6 6
Table 7 Displaying information of display dsl configuration
Field
Line Params Set by User Line parameters at ATU-R end, for example, standard, DMT mode,
The following information appears after the link is activated.
Actual Config
Rate(kbps)
Latency
Syntax
display dsl status interface atm interface-number
View
Any view
Parameter
interface-number: Interface number.
Description
Using the display dsl status command, you can display the DSL state information.
Example
Display the ADSL state information of the interface 1/0/0.
[3com-Atm1/0/0]display dsl status interface atm 1/0/0
State of driver/chipsets
Phy Op State:
Description
framing, trellis coding or not. You can only modify the standard for special
testing or diagnosis, but not the others.
Actual operating parameters after the link is activated
Negotiated rate, AS0 (DS) downlink and LS0 (US) uplink, in units of kbps
Delay mode and the options include fast and interleave.
Active