3Com 3031 Command Reference Manual page 420

420 C 5: N
HAPTER ETWORK
display dhcp server
conflict
P
ROTOCOL
Description
Using the dhcp server static-bind command, you can configure a static address
binding in the DHCP address pool of the current interface. Using the undo dhcp
server static-bind command, you can delete the configuration.
By default, static address binding is not configured in any interface address pool.
In all the static address binding operations performed on an interface, the IP
addresses and the MAC addresses must be unique.
Example
Statically bind the MAC address 0000-e03f-0305 with the IP address 10.1.1.1.
[3Com-Ethernet1/0/0] dhcp server static-bind 10.1.1.1 0000-e03f-0305
Syntax
display dhcp server conflict [ ip ip-address | all ]
View
Any view
Parameter
ip-address: A specified IP address.
all: All the IP addresses.
Description
Using the display dhcp server conflict command, you can view the DHCP address
conflict statistics, including the information in conflicted IP address, conflict
detection type, conflict time, etc.
If no optional parameter has been specified, the information displayed will depend
on the current view:
In Ethernet interface view, the information displayed is concerned with the
address pool of the current interface.
In any other views, the information displayed is concerned with all the address
pools.
For the related command, see reset dhcp server conflict.
Example
View the DHCP address conflict statistics.
<3Com> display dhcp server conflict
Address
10.110.1.2
Table 1 Description of the information displayed by executing display dhcp server conflict
Major item
Address
Discover Time
Discover Time
Jan 11 2003 11:57: 7 PM
Description
The conflicted IP address
Time when the conflict is discovered