3Com 3031 Command Reference Manual page 357

display x25 switch-table
pvc
display x25 switch-table
PAD is a kind of application similar to telnet. It can establish the connection
between two ends through X121 address, and then, to carry out configuration
operations.
For the related commands, see display x25 vc and x25 xot.
Example
Display X.25 PAD connection information.
[3Com] display x25 pad
UI-INDEX130:
From remote 22 connected to local 11, State: Normal
X.3Parameters(In):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
X.3Parameters(Out):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
Input:
Pkts(total/control): 13/2
queue(size/max) :0/200
Output:
Pkts(total/control): 15/2
Syntax
display x25 switch-table pvc
View
Any view
Parameter
None
Description
Using the display x25 switch-table pvc command, you can view X.25 switching
virtual circuit table.
For the related commands, see x25 pvc, x25 switch pvc, x25 xot pvc, x25 fr pvc,
and x25 switch svc.
Example
Display X.25 switching virtual circuit table.
[3Com] display x25 switch-table pvc
#1 (In: Serial0/0/0-vc1024)<— —>(Out: Serial1/0/0-vc1}
#2 (In: Serial1/0/0-vc1024)<— —>(Out: Serial0/0/0-vc1}
Syntax
svc
display x25 switch-table svc { dynamic | static }
LAPB and X.25 Configuration Commands
bytes:12
bytes:320
357