3Com 3031 Command Reference Manual page 415

dhcp server nbns-list (in
System View)
Description
Using the dhcp server nbns-list command in interface view, you can configure
NetBIOS server addresses in the DHCP address pool of current interface. Using the
undo dns-list command in interface view, you can delete the configuration.
By default, no NetBIOS address is configured.
By far, only up to eight NetBIOS addresses can be configured in each DHCP
address pool.
For the related commands, see dhcp server ip-pool, dhcp server nbns-list (in
system view), nbns-list, and netbios-type.
Example
In the DHCP address pool of Ethernet1/0/0, allocate the NetBIOS server at
10.12.1.99 to the clients.
[3Com] interface ethernet 1/0/0
[3Com-Ethernet 1/0/0] dhcp server nbns-list 10.12.1.99
Syntax
dhcp server nbns-list ip-address [ ip-address ] { interface
ethernet-subinterface-range | all }
undo dhcp server nbns-list { ip-address | all } { interface
ethernet-subinterface-range | all }
View
System view
Parameter
ip-address: IP address of NetBIOS server. You can configure up to eight IP
addresses separated by spaces in a command.
all: In the undo form of the command, the first "all" refers to all the NetBIOS
server addresses and the second, all the interfaces.
ethernet-subinterface-range: Includes any the subinterfaces whose interface
number lies between two subinterface numbers (including these two
subinterfaces) by inserting the keyword "to" between these two interface
numbers.
Description
Using the dhcp server nbns-list command in system view, you can configure
NetBIOS server addresses for the clients that get ip address from the DHCP address
pool of the interfaces in a specified range. Using the undo dhcp server nbns-list
command in system view, you can delete the configuration.
By default, no NetBIOS address is configured.
By far, only up to eight NetBIOS addresses can be configured in each DHCP
address pool.
After configuring this command, you cannot view the configuration by executing
the display current-configuration command. By calling the dhcp server nbns-list
command respectively on the specified interfaces, you can fulfill the batch
configurations of the command.
DHCP Server Configuration Commands 415