Chapter 6 Dlsw Configuration Commands; Bridge-Set (Synchronous Interface View) - 3Com 3C13618 Command Reference Manual

3com 3c13618: reference guide
Table of Contents

Advertisement

Chapter 6 DLSw Configuration Commands

6.1 DLSw configuration commands
6.1.1 bridge-set (Ethernet interface view)
Syntax
bridge-set bridge-set-number
undo bridge-set bridge-set-number
View
Ethernet interface view
Parameter
bridge-set-number: Transparent bridge set to which the Ethernet interface will be
linked, ranging from 1 to 63.
Description
Using the bridge-set (Ethernet interface view) command, you can add an Ethernet
interface to DLSw bridge set. Using the undo bridge-set (Ethernet interface view)
command, you can cancel the Ethernet interface from the DLSw bridge set.
By default, no Ethernet interface is added to the bridge set .
Add an Ethernet interface to DLSw bridge set, the LLC2 frames can then be
transmitted to the peer entity at the far end.
Example
None

6.1.2 bridge-set (synchronous interface view)

Syntax
bridge-set bridge-set-number
Network Protocol
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3c136123c136133c13616

Table of Contents