Configuring monitoring applications
Analyzing RTP statistics output
This section describes the reports, statistics, and traps you can view, how to view them, and
how to understand the output, and includes the following topics:
Viewing RTP statistics summary reports
●
Viewing RTP session statistics
●
Viewing QoS traps, QoS fault traps and QoS clear traps
●
Analyzing QoS trap output
●
Analyzing QoS fault and clear trap output
●
Viewing RTP statistics summary reports
RTP statistics summary reports display QoS trap statistics for the VoIP engine(s).
To display RTP statistics summary reports:
1. Use the show rtp-stat summary command. For example:
G350-001(super)# show rtp-stat summary
Total QoS traps: 23
QoS traps Drop : 0
Qos Fault
Engine
ID
Description
---
--------------
000
Table 12
describes the fields in the summary report.
Table 12: RTP statistics summary reports output
Field
Total QoS traps
QoS traps Drop
254 Administration for the Avaya G250 and Avaya G350 Media Gateways
Uptime
-----------
internal
04,18:15:15
Description
The total number of QoS traps sent since the RTP statistics
application was enabled or since the last use of the rtp-stat
clear command.
The number of QoS traps dropped by the rate limiter since the RTP
statistics application was enabled or since the last use of the
rtp-stat clear command.
Active
Total
Mean
Session
Session
Duration
-------
-------
--------
2/1
35/24
01:04:44
Tx
TTL
----
64
1 of 2