Enable Restricted - Dell S6000 Reference Manual

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
To control access to command modes, use this command to define a password for
Information
a level and use the privilege level (CONFIGURATION mode) command.
Passwords must meet the following criteria:
•
•
Related
show running-config
Commands
privilege level (CONFIGURATION mode)
modes within the switch.

enable restricted

Allows Dell Networking technical support to access restricted commands.
S6000
Syntax
enable restricted [encryption-type] password
To disallow access to restricted commands, use the no enable restricted
command.
Security
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Start with a letter, not a number.
Passwords can have a regular expression as the password. To create a
password with a regular expression in it, use CNTL + v prior to entering regular
expression. For example, to create the password abcd]e, you type "abcd CNTL
v ]e". When the password is created, you do not use the CNTL + v key
combination and enter "abcd]e".
NOTE: The question mark (?) and the tilde (~) are not supported characters.
— views the current configuration.
— controls access to the command
1237